About Me

My photo
Stockport, United Kingdom
Spud is obsessed with all things wheeled, both with an without engine's. 2006 Open class uk champion at Boardercross racing mountain boards, his knee's have since given up and he spends more time on his bikes both with and without engines.

Sunday, 9 November 2014

First Ride fail

The first ride did not go well, would not pull at all, had to limp it home pretty much just letting it pull on idle.
I knew that the carbs weren't original and had been recently fitted and was told they'd need "setting up"

So the carbs had to come off for inspection, and I figured that while they were off I'd bin the air box and fit pods as a stepping stone towards the Bratstyle make over. It was a long drawn out fight that I eventually won, but there's no chance its going back on as its in a thousand pieces. Another interesting discovery was the use of 4 scouring sponges as an air filter.


 I took the carbs with me on a trip into Manchester and popped into see the nice people at NRP carbs to see if they could help, turns out a vital plug was missing out the carbs and that they already had the right main jets for running pods.
While I had them off I gave them a quick check and the diaphrams are starting to go but will be ok for a bit, and I figured I might as well use the carbs tops off the second set of I think original carbs as they are a nicer and Ali, so i gave them a little buff with some autosol and the dremmel and they came up quite nice, I didn't go ott just got em a bit nicer than they were. And a hell of a lot better than the manky steel tops that the carb cleaner half melted the paint off.




I got it all back together today (eventually) and after a number of issues with the throttle cable being too tight for some odd reason I finally got it to idle properly and was able to take it out for a test ride.

Its flat as a witches tit for the most part then over 7 thou takes of like a scalded cat, lots more work with the carbs me thinks to get it running better. And in spite of mt previous attempts the front brake was still sticking so I had another fight with that too.

May attempt some more tuning this week, and another short test ride to see if I got the brake sorted.
 
 

 Great lines on this bike, kicked up seat loop at the back and a new seat base, then hide the electrics and ditch the side panels and we'll be getting somewhere, far from original, but they look so good like that so why muck it up, but as I'm about to be a dad I strongly suspect that this sort of thing will be going on the back burner for a bit. Still if I can grab an hour here and there on it in the new garage who knows what may happen.

Sunday, 26 October 2014

Its not a project

So considering its not a project it did take 4 hrs of my time on Saturday afternoon.

Insurance is active as of today so I was trying to get it sorted out to how I want it for now ie minus the massive rear light and indicators plus trying to flatten out some of the nasty scabs on the fork legs in the hope of prolonging the seals.

I also discovered a few more horrors thanks to flattening the battery by leaving the lights on whilst checking the indicators.

This massive ring connecting the live to the battery was barely connecting it and is almost big enough to fit over the bolt, and to boot there's no battery strap so if I hadn't secured it, the damn thing would be rattling round all over the shop. I'll be riding it this week so I hope there's no more horrors.

The seat base has a pretty bad case of tin worm, but should last me long enough to fab up a rear loop and seat base for the Bratstyle look.

It was all going quite well at this point, and I'd done some test fits of the seat to check everything was ok.

But unfortunately I ended up with this, not exactly what I was after, and I'd run out of time to sort it out, as I'd been neglecting my other DIY  tasks and had to crack on with them. Oh well another hours work and a couple more holes in the already swiss cheese mudguard and we'll be there.

Saturday, 18 October 2014

Progress

Well there's been progress on a few fronts, after many many many months and visits to the unit where the project bike is, and lots of meters of tube ruined practising and working out all the hows and the why's followed by buying a former and re working out a few things, I have finally got the major parts of a subframe that I could weld together and I'm happy, BUT I'm aiming for perfection in my eyes, and am going to try and make the whole top section from one piece of tube.


There's progress on other fronts too, I have a front wheel attached and centred


But best of all, the footings for my garage are in, and what a monster its going to be, dream garage here we come.

Sunday, 28 September 2014

Its a disease

Its definitely a disease, and/or an addiction.

I didn't really need another bike yet I managed to justify it to myself, and anyone else who'll listen really. I mean I do need to keep my new KTM out of the salty winter weather, and I definitely don't want a  repeat of last years black ice binning it debacle on my nice new bike. The project bike is still very much that, (although I am making progress towards completing the sub frame, not enough to be worth documenting on here tho) so that's not suitable for a winter ride and the C200 is still pretty much just a rolling chassis .

So there I was in Bristol having spent a long weekend with my mate Graham helping him weld a trolley for the donor shell that being stripped of spares for his rally car. And I'm having a look through gumtree at the bike for any possible winter hacks as I'm thinking it might be a good idea to start seeing whats about in spite of the fact I have absolutely nowhere to put another bike, (the 10x8 shed just about holds the KTM).

Heart over rules head and I seriously start looking at some of the options being presented to, I desperately want the GSX-R 750 witht he last oil cooled engine for 900 quid, consider a Honda CB-1 thats stupid cheap at just over 500 quid but it does have a few running issue's so thats out, which left a lovely little 1982 GSX 400T, 400cc twin, wire spoke wheels , tax and test till Jan, truth be told I got a bit giddy about it, its crying out for a Bratstyle styled make over, and I got abit  more giddy when I went to see it and forgot to check everything properly and missed the badly pitted upper fork legs and came away with it anyway.

So here she is






So yesterday I spent £40 on bits for my new cheap winter hack, new fork seals, fork boots, a cover and some grips which had to be had for £7 to replace the totally out of character ugly POS things that were on it. And today having got it out the van I had a proper look at it and did the first job on it and sorted the sticky rear drum, I stupidly dropped the back wheel out before realizing the problem was closer to the front and it was the main pivot for the brake pedal that was the issue.

No pics of that but I did give it a few coats of looking at and discovered some questionable use of sellotape. This has now been removed and replaced with proper insulation tape.
 I have to wait until the end of October to put it on my multi bike policy as I dont want to pay the £25 admin fee to put it on now for just 4 weeks.

So all that remains to do now on this cheap winter hack that is absolutely not a project, is replace the gargantuan indicators and tail light with something a little more discrete, weld on a loop after shortening the rear sub frame, relocate the electrics and hide the cables, make up a new seat base and have it upholstered ...................................... you get the idea, but this is definitely not another project, no sir ee, absolutely not, just a little winter hack to keep the salt of the KTM ;0)

Monday, 8 September 2014

Preston HotRod meet

The stars finally aligned with my brain cells and not only was I free, but I remembered that it was the first Friday of the month, plus a lovely night to boot so I shot up to the Hot Rod meet at the Lea Green pub just outside Preston.

Loads of cool vehicles and people, everyone nice n friendly. Here's just a few of my favourites.








Saturday, 23 August 2014

Now its on!!!!

My former arrived today, proper tool for the job and all that

This should see an end to all my pipe bending woes.